ESSENCE Brand

ESSENCE is the main brand of ESSENCE and the brand with the most models in the "ESSENCE Air Compressors" category, 12 in total. Its products are positioned as affordably priced and reliably built, mainly PM VSD screw models, exported to Europe and Southeast Asia, backed by Fusheng Group and a complete after-sales service system.

1. How the 12 Models Are Distributed

2. What Each of the Four Product Lines Does

• PM VSD screw air compressors: the brand's mainstay, with a working pressure range of 0.7–1.25 MPa and a wide span of air delivery and power, from 7.5–37 kW on the EMX up to 45–300 kW on the ESV-M;
• Two-stage screw air compressors: aimed at high-pressure and energy-saving needs, splitting one compression into two stages with intercooling;
• Laser cutting air compressors: working pressure 1.6 MPa, dedicated to laser cutting air supply;
• Engineering and low pressure air compressors: FG is an engineering screw machine and FL a low-pressure screw machine, with a working pressure of 0.3–0.45 MPa, air delivery of 6.0–50.8 m³/min and power of 30–220 kW.

3. How to Choose Among the 12

1. General air supply: start with the PM VSD screw product line, matching by air delivery and power;
2. High pressure or long-term continuous operation: give priority to two-stage models;
3. Laser cutting support: go straight to the dedicated laser cutting models;
4. Low pressure, high flow or an engineering site: choose the FL low-pressure screw machine or the FG engineering model.

4. What to Watch for in Selection

• Set the pressure rating first: 0.7, 0.8, 1.0 and 1.25 MPa correspond to different processes, and the higher the pressure, the smaller the available air delivery usually is;
• Leave a reasonable margin in air delivery: base it on peak demand and avoid over-specification;
• Check the electrical specification: some models support 220/380/415/440 V, 50/60 Hz;
• Service capability: the after-sales system backed by Fusheng Group is a safeguard for long-term use.